BRIFLONä HEAT SHRINKABLE
FEP & PTFE TUBINGS
SH200,
SH206, & SHTF tubings have excellent resistance to weathering, chemicals
(oils, fuels, solvents,
acids, alkalis, fluids),
& fungus, are non-corrosive, low water absorption (.01%), will not burn nor
support
combustion, have high
dielectric strength (850V/MIL dry), low dielectric constant, & a very low
coeffici-
ent of friction. High
mechanical strength yet flexible (low temperature flexibility -67°C).
Color: Natural
(FEP-transparent). Their excellent electrical characteristics remain stable
throughout
their electrical
range. Longitudinal change with full shrinkage: FEP — 15%.
SHTF SHRINKABLE PTFE/FEP
SHTF is made with a
combination of PTFE and FEP resins. The inner wall is made of FEP and the
outer
wall of PTFE.
When the tubing is heated, the PTFE begins to shrink down tightly over the
FEP. The FEP
inner wall melts and flows
-squeezes- into
and around the item covered, creating a solid or near solid
encapsulation.
The fit is so tight that
it is safe against most environmental hazards involving pull or
vibrations. It can
be used as a strain relief,
or moisture-proof covering for wires, connectors, terminals, splices,
electronic
devices, etc. SHTF is
non-flammable, non-corrosive, and offers all of the other outstanding
electrical
chemical, & mechanical
properties of Teflon*. OPER. TEMP.: -85°F to +450°F
Briflon |
Min.
Exp. |
Max.
Rec. |
Dimen. |
|
Briflon |
Min.
Exp. |
Max.
Rec. |
Dimen. |
SHTF-1 |
.065" |
.000"** |
.015" |
|
SHTF-6 |
.240" |
.150" |
.020" |
SHTF-2 |
.115" |
.045" |
.015" |
|
SHTF-7 |
.350" |
.210" |
.025" |
SHTF-3 |
.130" |
.060" |
.015" |
|
SHTF-8 |
.480" |
.315" |
.032" |
SHTF-4 |
.180" |
.065" |
.015" |
|
SHTF-9 |
.700" |
.440" |
.055" |
SHTF-5 |
.190" |
.070" |
.015" |
|
SHTF-10 |
1.000" |
.700" |
.045" |
** Fully closes
off. +In random lengths of 1 to
3 Ft.
RoHS compliant.
SH200 (SHRINKABLE FEP)
1.3:1 MIL-I-23053/11 200°C
SH200: an extruded
modified FEP (Fluorinated-Ethylene-Propylene) tubing, with a continuous
Oper. Temp. of +205°C
(400°F). SH200 completely shrinks at 384°F (partial shrinkage possible at
300°F).
Shrinkage ratio --
1.3:1. It melts at 525-563°F so it can be used to encapsulate. Now
many sensitive
components, parts, devices,
etc. can be protected with FEP. Fills void between the high
temperature
of PTFE, and the lower temperatures of shrinkable PVC and Polyolefin
tubings.
Mfg. per MIL-I-23053/11 Cl.1 STD. P-U: 100' (4ft. min. lengths.)
Briflon |
Min.
|
Max. |
Dimen. |
± Wall |
|
Briflon |
Min. |
Max. |
Dimen. |
± Wall |
SH200-24 |
.031" |
.027" |
.008" |
.002" |
|
SH200-3 |
.310" |
.249" |
.011" |
.004" |
SH200-22 |
.036" |
.032" |
.008" |
.002" |
|
SH200-2 |
.365" |
.280" |
.012" |
.004" |
SH200-20 |
.045" |
.039" |
.008" |
.002" |
|
SH200-1 |
.400" |
.311" |
.012" |
.004" |
SH200-18 |
.060" |
.049" |
.008" |
.002" |
|
SH200-0 |
.440" |
.349" |
.012" |
.004" |
SH200-16 |
.075" |
.061" |
.009" |
.002" |
|
SH200-3/8" |
.500" |
.383" |
.015" |
.004" |
SH200-14 |
.092" |
.072" |
.009" |
.002" |
|
SH200-7/16" |
.580" |
.448" |
.020" |
.004" |
SH200-12 |
.115" |
.089" |
.009" |
.002" |
|
SH200-1/2" |
.666" |
.510" |
.020" |
.004" |
SH200-10 |
.141" |
.114" |
.010" |
.003" |
|
SH200-5/8" |
.830" |
.637" |
.025" |
.004" |
SH200-9 |
.158" |
.124" |
.010" |
.003" |
|
SH200-3/4" |
1.000" |
.764" |
.030" |
.004" |
SH200-8 |
.180" |
.143" |
.010" |
.003" |
|
SH200-7/8" |
1.170" |
.891" |
.035" |
.004" |
SH200-7 |
.197" |
.158" |
.011" |
.004" |
|
SH200-1" |
1.330" |
1.020" |
.035" |
.004" |
SH200-6 |
.225" |
.180" |
.011" |
.004" |
|
SH200-1 1/4" |
1.660" |
1.270" |
.035" |
.004" |
SH200-5 |
.248" |
.198" |
.011" |
.004" |
|
SH200-1 1/2" |
2.000" |
1.520" |
.035" |
.004" |
SH200-4 |
.290" |
.226" |
.011" |
.004" |
|
|
|
|
|
|
** All dimensions are based on full
recovery.
RoHS compliant.
OTHER SIZES IN PTFE AND FEP, AND COLORS
ARE AVAILABLE TO ORDER.
ETCHING FOR BONDING IS AVAILABLE TO ORDER.
SH206 (SHRINKABLE FEP) 1.6:1 MIL-I-23053/11 200°C
SH206 tubings are
extruded modified FEP (Fluorinated-Ethylene-Propylene) tubing, with a
continuous Oper. Temp. of
+205°C (400°F). SH206 can completely shrink at 384°F with partial
shrink-
age as low as 350°F.
Shrinkage ratio -- 1.6:1. Suitable for those applications where 1.6:1
shrink
capabilities are required
and standard 1.3:1 shrink FEP is not sufficient. It melts at 525-563°F so
it
can be used to
encapsulate. Now many sensitive components, parts, devices, etc. can be
protected
with FEP. Fills
void between the higher temperature of PTFE, and the low temperatures of
shrink-
able PVC and Polyolefin
tubings. Mfg. per MIL-I-23053/11 Cl.2. STD. COLOR: Natural
(Transparent).
Briflon |
Min. |
Max. |
Dimen. |
± Wall |
STD. |
|
Briflon |
Min.
|
Max. |
Dimen. |
± Wall |
STD. |
SH206-3/32" |
.093" |
.056" |
.008" |
.003" |
100' |
|
SH206-1/2" |
.500" |
.300" |
.015" |
.004" |
100' |
SH206-1/8" |
.125" |
.075" |
.010" |
.003" |
100' |
|
SH206-3/4" |
.750" |
.450" |
.020" |
.004" |
100' |
SH206-3/16" |
.188" |
.115" |
.010" |
.003" |
100' |
|
SH206-1" |
1.000" |
.600" |
.025" |
.005" |
50' |
SH206-1/4" |
.250" |
.150" |
.010" |
.003" |
100' |
|
SH206-1 1/2" |
1.500" |
.900" |
.030" |
.005" |
50' |
SH206-3/8" |
.375" |
.225" |
.012" |
.003" |
100' |
|
SH206-2" |
2.000" |
1.200" |
.030" |
.005" |
50' |
*4ft. min.
lengths. RoHS compliant.
OTHER SIZES AND
COLORS AVAILABLE TO ORDER
ETCHING FOR BONDING IS AVAILABLE TO ORDER.
BRIM ELECTRONICS, INC. 120
HOME PLACE LODI, NJ 07644
TEL: 201-796-2886
FAX: 973-778-2792 E-MAIL: info@brimelectronics.com