FLAT BRAIDING--FLAT & TUBULAR
              BRAIDING PER QQ-B-575
      STAINLESS STEEL TUBULAR BRAID
                  


                   FLAT TINNED COPPER BRAID 

TlNNED COPPER conductors braided then rolled flat.  Conductors are annealed for flexibility.  
Used as grounding cable, bonding strap for aircraft, marine equipment vehicles, etc. to eliminate 
ignition interference.  Easily slides over wire and cables.   Also used as a high current conductor 
at low voltages. 

BRIM
No.
Construction Flattened
     I.D.
Flattened
     O.D.
   AWG
  Equiv.
 Nom.
 CMA
AMPS*  Std. P-U
1110-1/32"     24x1-36     1/32"     3/64"      22     600      7 100’,1000’
1110-3/64"     12x2-36     3/64"     1/16"      22     600      7 100’,1000’
1110-1/16"     24x2-36     1/16"     5/64"      19    1200     11 100’,1000’
1110-3/32"     16x3-36     3/32"      1/8"      19    1200     11 100’,1000’
1110-1/8"     24x4-36      1/8"     3/16"      16    2400     17 100’,1000’
1110-3/16"     24x5-36     3/16"     7/32"      15    3000     20 100’,1000’
1110-1/4"     24x7-36      1/4"     9/32"      14    4200     25 100’,1000’
1110-5/16"     48x4-36     5/16"      3/8"      13    4800     28   100’,500’
1110-3/8"     48x6-36      3/8"        13/32"      12    7200     32   100',500'
1110-7/16"     48x7-36     7/16"    15/32"      11    8400     35   100',500'
1110-1/2"     48x8-36      1/2"    17/32"      10    9600     46   100’,500’
1110-5/8"    48x11-36      5/8"    11/16"       9  13200     52   100’,500’
1110-3/4"    48x15-36      3/4"    13/16"       8  18000     60   100’,500’
1110-25/32"    48x18-36    25/32"    27/32"       7  21600     73      100’,250’
1110-1"    48x19-36       1"   1 1/16"       7  22800     75      100’,250'
1110-1 3/8"    48x19-36    1 3/8"   1 7/16"       7  22800     75     50’,100’
1110-1 1/2"    48x19-36    1 1/2"   1 9/16"       7  22800     75     50’,100’
1110-1 3/4"    48x27-30    1 3/4"    1 7/8"      00 129600    230     50’,100’
1110-2"    48x32-30       2"     2 1/4"     000 153600    270     50’,100’
1110-2 1/4"    48x35-30    2 1/4"     2 1/2"     000 168000    300     50’,100’
1110-2 1/2"    48x44-30    2 1/2"     2 3/4"    0000 216000    320     50’,100’
1110-2 3/4"    48x52-30    2 3/4"       3"    0000 249600    340     50’,100’
1110-3"    48x64-30       3"     3 1/4" 300MCM 307200    430     50’,100’

*Current Carrying Capacity.  Values are based on copper in free air at 65°F—intended as a guide only. 



                         QQ-B-575 FLAT TINNED COPPER BRAID                 ( NEW)

                
DESCRIPTION: Flat tinned copper braid, per MIL SPEC. QQ-B-575F,  A-A-59569C, 95% minimum 
shielding coverage.   Conductors are annealed tinned copper.     
Suitable for EMI & RFI removal,  grounding straps, bonds, leads, and flexible connectors
.

BRIM
No.
    Flat I.D./
 Flat O.D.x Thick.
No.of
Wires
   Indiv.
   Const.
Appx.
AWG
 Nom.
 CMA
AMPS
CAP*
Std.
P-U
1115-3/64"  .031" / .046" x .020"     24 24 x 1 - 36     22     600      7   1,3
1115-3/32"  .062" / .093" x .031"     48 24 x 2 - 36     19   1200     11   1,3
1115-5/64"  .078" / .125" x .020"     72 24 x 3 - 36     17   1800     16   1,3
1115-7/64"  .109" / .156" x .031"     96 24 x 4 - 36     16   2400     19   1,3
1115-1/8"  .125" / .187" x .020"    120 24 x 5 - 36     15   3000     25   1,3
1115-5/32"  .156" / .250" x .046"    240 24 x 10 - 36     12   6000     40   1,3
1115-11/64"  .171" / .250" x .030"    168 24 x 7 - 36     14   4200     32   1,3
1115-13/64"  .203" / .281" x .046"    312 24 x 13 - 36     11   7800     46   1,3
1115-3/8"  .375" / .625" x .030"    384 48 x 8 - 36     10   9600     53   1,3
1116-7/16"  .437" / .500" x .093"    240 24 x 10 - 30      6  24000     90   1,2
1115-1/2"  .500" / .625" x .046"    528 48 x 11 - 36      9  13200     62   1,2
1116-1/2"  .500" / .625" x .093"    360 24 x 15 - 30      5  36000    120   1,2
1115-25/32"  .781" / .938" x .040"    864 48 x 18 - 36      7  21600     88   1,2
1116-7/8" .875" / 1.375" x .050"    336 48 x 7 - 30      5  33600    100   1,2
1116-1" 1.000" / 1.400 x .055"    384 48 x 8 - 30      4  38400    120   1,2
1116-1 1/4" 1.250" / 1.450" x .057"    432 48 x 9 - 30      4  43200    130   1,2
1116-1 3/8" 1.375" / 1.500" x .060"    528 48 x 11 - 30      3  52800    150   1,2

STD. P-U: 1= 100’, 2= 500’, 3= 1000’ *CURRENT IN FREE AIR @ 30°C
Nickel plated constructions per A-A-59569A are available to order.




                      
TUBULAR BRAID PER QQ-B-575R

TINNED COPPER TUBULAR shielded braiding, round, per MIL Spec. QQ-B-575R, A-A-59569C.  Shielding coverage of 95% min.  Used in military or critical commercial applications where maximum shielding coverage is required against electrostatic interference.   Also useful as grounding wire/cable, bonding leads, flexible connectors, & protects against mechanical abrasion & stresses for wires and cable bundles.  Each wire is soft drawn tinned copper.
  

Brim
No.
Nom. I. D.
  Round
No. of
Wires
Construc. Appx.
AWG
 Nom.
 CMA
AMPS*  Std. P-U
1100-1/32"      1/32"    24 24x1-36    22     600     7 100’,1000’
1100-1/16"      1/16"    48 24x2-36    19   1200    11 100’,1000’
1100-5/64"      5/64"    72 24x3-36    17   1800    15 100’,1000’
1100-7/64"      7/64"    96 24x4-36    16   2400    17 100’,1000’
1100-1/8"       1/8"   120 24x5-36    15   3000    20 100’,1000’
1100-5/32"      5/32"   240 24x10-36    12   6000    40 100’,1000’
1100-11/64"     11/64"   168 24x7-36    14   4200    32 100’,1000’
1100-3/16"      3/16"   192 24x8-36    13   4800    33 100’,1000’
1100-13/64"     13/64"   312 24x13-36    11   7800    46 100’,1000’
1100-1/4"       1/4"   384 24x16-36    10   9600    53 100’,1000’
1101-9/32"      9/32"   120 24x5-30     9 12000    60   100’,500’
1100-3/8"       3/8"   384 48x8-36    10   9600    53   100’,500’
1101-7/16"      7/16"   240 24x10-30     6 24000    90   100’,500’
1100-1/2"       1/2"   528 48x11-36     9   13200    62   100’,500’
1100-9/16"      9/16"   528 48x11-36     9 13200    62   100’,500’
1101-9/16"      9/16"   480 48x10-30     3 48000   145   100’,250’
1101-21/32"     21/32"   768 48x16-30     1 77180   190   100’,250’
1100-11/16"     11/16"   720 48x15-36     8 18000    70   100’,250’
1100-25/32"     25/32"   864 48x18-36     7 21600    88   100’,250’
1100-13/16"     13/16"   864 48x18-36     7 21600    88   100’,250’
1101-7/8"       7/8"   336 48x7-30     5    33600   100     50’,100’
1101-1"        1"   384 48x8-30     4 38400   120     50’,100’
1101-1 1/8"     1 1/8"   432 48x9-30     4 43200   130     50’,100’
1101-1 1/4"     1 1/4"   480 48x10-30     3 48000   145     50’,100’
1101-1 3/8"     1 3/8"   528 48x11-30     3 52800   150     50’,100’
1101-1 1/2"     1 1/2"   576 48x12-30     3 57600   165     50’,100’

*Current Carrying Capacity.   Values are based on copper in free air at 65°F.   Larger sizes & construction
variations are  available to order.   All of the above are available in bare or Silver plated copper, &
Nickel plated copper constructions are available to order.     



 STAINLESS STEEL TUBULAR BRAID

STAINLESS STEEL TUBULAR shielded braid manufactured with type 304 soft drawn Stainless Steel.  
Used where higher temperatures & or greater mechanical strength is needed.   STD. P-U: 100 feet.

                  

Brim No. Nom. I.D.
Rounded
Total No.
of Wires
Construction  AWG
Equiv.
NOM.
CMA 
1150-1/32"      1/32"        48     16-3x36     19   1200
1150-1/16"      1/16"        48     24-2x36    19    1200
1150-5/64"      5/64"        72    24-3x36    17    1800
1150-7/64"      7/64"       96    24-4x36    16    2400
1150-1/8"       1/8"      120    24-5x36    15   3000
1150-11/64"     11/64"       168    24-7x36    14   4200
1150-3/16"      3/16"       192    24-8x36    13   4800
1150-7/32"      7/32"       240    24-10x36    12   6000
1150-1/4"       1/4"       312    24-13x36    11   7800
1150-3/8"       3/8"       336    48-7x36    11   8400
1150-7/16"      7/16"       384    48-8x36    10   9600
1150-1/2"       1/2"      432    48-9x36    10 10800
1150-5/8"       5/8"       528    48-11x36     9 13200
1150-3/4"       3/4"       720    48-15x36     8 18000
1150-7/8"       7/8"       864    48-18x36     7 21600
1150-1"        1"      336    48-7x30     5 33600
1150-1 1/4"     1 1/4"       384    48-8x30     4 38400
1150-1 1/2"     1 1/2"       480    48-10x30     3 48000

OTHER CONSTRUCTIONS INCLUDING MAGNETIC TYPE 430 STAINLESS STEEL ARE AVAILABLE TO ORDER.




BRIM ELECTRONICS, INC. 120 HOME PLACE    LODI, NJ 07644
TEL: 201-796-2886     FAX: 973-778-2792     E-MAIL: info@brimelectronics.com